Swastik Enterprises

* Direct and alternating voltages from 100 µV ... 1000V

           * Direct and alternating currents from 10 µA ... 10.00A

           * Resistances from 100mOhm ... 40.00MOhm with zero correction

           * Capacitance from 1pF... 200.00µF with zero correction.

           * Frequencies from 10.00Hz ... 500.0kHz

           * Diode measurement and continuity testing

           * Hold measurement

           * Relative measurement

           * Duty cycle (%) measurement

           * Temperature measurement with K type Thermocouple

The new Rishabh Young and Rishabh iYoung Multimeter are compact, Handy & Trendy multimeters specially targeted for applications of Electrical contractors, Service Industry, Technicians, HVAC and also the education sector i.e., students who will be the future of tomorrow 

• Pocket size compact Multi-meter
• Direct and alternating voltages from 100μV ... 600V
• Direct and alternating currents from 10μA ... 10.00A (Rishabh iYoung)
• Resistance from 1Ω... 40.00MΩ with zero correction
• Frequencies from 10.00Hz ... 500kHz
• Diode measurement and continuity testing
• Data Hold
• Relative measurement
• Duty cycle (%) measurement
• Non-Contact Voltage Detection
• Drop proof Multimeter

Technical specifications

Hold:

By pressing the HOLD key, the currently displayed measurement value can be held and “HOLD” is simultaneously displayed.

Relative measurement (REL):

By pressing the REL key, the zero correction is made. All functions can do zero correction except Hz/Duty.

Automatic/manual measuring range selection:

The measurement functions are chosen with the rotary selector switch. The measuring range is automatically adjusted to the measurement value. The measuring range can also be manually selected with the AUTO/MAN button.

Note : For Frequency ( Hz ) , Duty cycle ( % ), and Capacitance ( F ) measuring range is AUTO . No Manual range selection is possible.

Hz/Duty:

The instrument can measure frequency (Hz) and duty cycle (%) of the AC Voltage by pressing Function (Yellow) key.

Non-Contact Voltage Detection:

RISHABH Young / iYoung allows you to detect the voltage presence in the live circuit without any electrical contact. NCV will be detected above 120V AC without safety cover.

Overload warning:

An acoustic signal occurs when measuring AC voltage>750V, DC Voltage>1000V, AC/DC mA current>400.0mA (Rishabh iYoung), AC/DC current>10.00A (Rishabh iYoung).

Energy saving circuit (Auto Power Off):

The instrument is switched off automatically, if none of the operating elements have been activated for about 15 minutes.

Protective cover for rough operating conditions:

A protective cover of Rubber Holster with a built-in stand protects the instrument against jolts and falls.

Others:

It has provision of mounting clip for hands free operation in awkward situation.

Diode and continuity testing:

This provides for the testing of the polarity of diodes, as well as inspection for short-circuits and circuit interruptions. In addition to the display, resistance of less than approx. 60 ± 5Ω are indicated with an acoustic signal

Description:-

- It is possible to use all models of RISH multi series, in direct connection of temperature sensor Pt 100 / Pt 1000.
The meters automatically detects the type of sensors connected to it displays directly measured temperature.

Features:-

- Automatic Terminal Blocking System (ABS) 
- Interface and Software RISH com 100 
- MIN/MAX Value Storage 
- Indication Of Negative Values On The Analog Scale 
- Automatic Data Hold 
- Auto-ranging / Manual Range Selection 
- Continuity Test 
- Signaling in the case of a blown fuse 
- Power economizing circuit 
- Overload Warning 
- Protective holster for rough duty

SPECIFICATIONS :-

• Identify complex signal problems fast
• Supports accurate measurements on VFDs using a low-pass filter
• Captures intermittents as fast as 250 µS with Peak Capture
• Easy-access door for fast battery changes without breaking the calibration seal
• Analog bar graph for fast changing or unstable signals
• Large digit display with bright, two-level backlight for easier reading in low light
• Touch Hold keeps readings on display even after removing probes

• Provides the baseline multimeter features you need for troubleshooting and repairing electrical and electronic systems
• Delivers accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
• Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording

• Single Input digital thermometer for lab, QA, process calibration, food safety and HVAC
• Measures J, K, T, and E-type thermocouples
• Presents results in °C, °F, or Kelvin (K) on a large backlit display
• Includes a relative time clock on MIN, MAX, and AVG to provide a time reference for major events

Rish Shunts provide DC millivolt signal proportional to higher DC current to drive ammeter indicators, overload protection and control devices. These are made from Manganin material. Available from 1A to 15000A with an accuracy 0.5 & 1%. Standard voltage drop is 50, 60, 75, 100 & 150mV.