Swastik Enterprises

• The body weighs only 132g and is 16mm thick, which is light and portable and can be fitted into a pocket
• The slim and thin jaw of only 10mm can easily clamp onto tightly packed wires
• 400A AC range, 0.01A high resolution
• Tests voltage, resistance and continuity
• Tests current frequency and voltage frequency
• Tests capacitance and diodes

• High performance clamp meter that measures very low voltage and high resistance
• Measures AC and DC current to 600 A, and AC and DC voltage to 1000 V
• Measures AC current to 2500 A AC with optional iFlex flexible current probe

• Measure voltage and current with your clamp jaw
• Faster, safer testing - all without touching a live wire - using FieldSense™ technology
• Power quality indicator shows whether equipment or power line is faulty
• Complete 3-phase voltage and current tests in 3 quick steps

• 200 A AC and DC current measurement with detachable jaw
• 600 VAC and DC voltage measurement
• Detachable jaw makes accessing wires and viewing the display easier
• Built in flashlight/torch allows for easy illumination and identification of wires
• CAT III 600 V
• Compact design fits in your hand and can be used while wearing protective equipment
• State of the art signal processing allows for use in noisy electrical environments while providing stable readings
• Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement
• Three-year warranty
• Soft carrying case

• True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms
• 40 mm jaw opening
• Highest resolution of 1 μA, measure up to 60 A
• Selectable filter function removes unwanted noise
• Max/Min/Average readings and hold function
• Forward-facing LED worklight for use in dark wiring cabinets
• Backlit display; auto backlight off and auto power off for extended battery life
• CAT III 600V safety rating
• Internal Memory Logging: up to 65,000 measurement points

• True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms
• 61 mm jaw opening
• Highest resolution of 1 μA, measure up to 60 A
• Selectable filter function removes unwanted noise
• Max/Min/Average readings and hold function
• Forward-facing LED worklight for use in dark wiring cabinets
• Backlit display; auto backlight off and auto power off for extended battery life
• CAT III 600V safety rating

• Reliably handle a wide range of high-current applications with 2000 A AC + DC true-rms, 1400 A ac, and 2000 A DC
• The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
• CAT IV 600 V, CAT III 1000 V rating for added user protection
• In-rush current measurement captures ‘power-on’ surge current with accuracy and repeatability
• Accurately measure frequency up to 1 kHz for optimum troubleshooting
• Quickly analyze readings using the MIN, MAX, and AVG functions
• A large backlit display allows for easy visibility in low-lit areas
• Use the display hold feature to capture readings even when the display cannot be viewed
• Use the low-pass filter to smooth out noisy loads and stabilize readings

• Reliably handle a wide range of high-current applications with 2000 A AC + DC True RMS, 1400 A AC, and 2000 A DC
• The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
• CAT IV 600 V, CAT III 1000 V rating for added user protection
• In-rush current measurement captures ‘power-on’ surge current with accuracy and repeatability

• Measure safely with CAT III 1500 V rated clamp meter
• Thin jaw for access to cables in crowded combiner boxes
• Sturdy IP54 rated for outdoor use and solar installation
• Work efficiently with dc power measurement, audio polarity and visual continuity

• Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
• AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
• Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
• Logging measurement: Saves up to 32,760 measurements in memory

RISHABH 616 is a rugged, TRMS, Functionally enhanced dual display, 6600 count, portable multimeter, a perfect tool for wide range of applications.
The other key features include MIN/MAX, Data Hold and Peak Hold

• Diode measurement and continuity testing
• Hold measurement
• Relative measurement
• Temperature measurement with K type Thermocouple
• Peak value measurement.

• Measure voltage and current with your clamp jaw
• Faster, safer testing - all without touching a live wire - using FieldSense™ technology
• Complete 3-phase voltage and current tests in 3 quick steps

• Wireless technology allows the display to be carried up to 30 ft. away from the point of measurement with measurement accuracy
• Removable magnetic display can be mounted where it is easily seen
• iFlex® Flexible Current Probe expands the measurement range to 2500 A AC
• CAT IV 600 V, CAT III 1000 V

• Best in class 0.2 % accuracy
• 0.01 mA resolution and sensitivity
• Measure 4 to 20 mA signals without ”breaking the loop”
• Measure mA signals for PLC and control system analog I/O
• Dual backlit display with both mA measurement and percent of 4 to 20 mA span
• Measurement Spotlight illuminates hard to see wires in dark enclosures
• Detachable clamp with extension cable for measurements in tight locations
• Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
• Automatically change the 4 to 20 mA output for remote testing
• Power saving features, auto-off, backlight timeout extend battery life
• Hold function captures and displays changing measurements

We provide our clients with an outstanding range of Fluke 362 Clamp Meter. The clamp meters are perfect for electrical technicians/engineers who need to take a broad range of current measurements in commercial, residential and industrial installations. Moreover, we offer these meters as per clients’ specifications.

• Thin, light, compact body design for one-hand operation
• 18mm triangular jaw allows for easy measurement on small cables
• Large, easy-to-read backlit display for easy viewing
• 200 A ac and dc current and 600 V ac and dc voltage measurement range
• 3000 Ω resistance range, continuity detection
• Zero function allows the display to be cleared for DC measurements
• Data Hold function
• CAT III 600 V safety rating
• Light in weight
• Durability

Technical Details:

• Brand Name: Rishabh
• Model: Rishmulti SI 232
• Maximum AC Volts: Others
• Maximum DC Volts: Others
• Maximum Current Rating: Others

• Fully Safety jaw
• Ergonomic over-molded body gives convenient one-hand operation
• Large easy-to-read display with 0.01A resolution
• Accurate reading with True RMS
• 60/600/1000A auto-ranging
• Long battery life
• Safety Standard
• IEC 61010-1 CAT IV 300V / CAT III 600V

• Reliable, repeatable, accurate device for checking bearings and overall vibration
• Features innovative sensor design that minimizes measurement variations caused by device angle or contact pressure
• Provides consistent data quality at both low and high frequency ranges
• Offers four-level severity scale to assess urgency of problems and bearing condition

• Designed to meet international safety standard IEC 61010-1 CAT IV 600V.CAT IV Clamp Meters can measure the Voltage and Current in both every low and high power circuits.
• Very useful for power distribution companies, power utilities and maintenance fields.
• 600A AC/DC True RMS enables an accurate measurement.

• Fully Safety jaw
• Ergonomic over-molded body gives convenient one-hand operation
• Large easy-to-read display with 0.01A resolution
• Accurate reading with True RMS
• 60/600/1000A auto-ranging
• Long battery life
• Safety Standard
• IEC 61010-1 CAT IV 300V / CAT III 600V

• Easily source and measure process parameters
• Calibrate temperature and pressure transmitters
• Measure and source mA, Volts DC, frequency, and resistance
• Built-in 24 V loop power supply
• Store and recall frequently used calibration set ups
• Simple controls and backlit display make it easy-of-use

Product Description:

• Versatile & Handy
• DC 1000A / AC 800 A Clamp-on + Full Multimeter ranges
• 50mm Large Jaws opening
• Fully Auto-ranging on all functions for ease of use
• Backlighted Display (Only for Model 2754A-T)
• 30ms Max HOLD to capture IN-Rush currents
• Data Hold & Relative Zero feature
• Battery cover with Probe holders
• Rugged Fire retarded casing.
• Transient protection 6.5kV (1.2/50µS lightning surge
• LVD EN61010-2-032 CAT III 600V EMC EN61326 (97/98A1) / EN61000-4-2 (95) / EN61000-4-3(96)

• Measure voltage to 1000 V AC without test leads
• Simultaneously measure voltage and current
• 17.8 mm open fork is widest in the industry
• Measure up to 200 A on 4/0 wires (120 mm2)

MODEL KM 1812 EL ( 7 Functions 17 Ranges)

Special Features
• 2 Lines x 16 Characters L.C.D
• Low power consumption
• Microprocessor Controlled
• Menu Driven
• Accurate Digital Readout of Disconnection Time.
• Automatic Data Hold function.
• Zero Crossing Circuitry permit testing at 0° or 180°
• Disconnection Phase Polarity shown on L.C..D.Display
• Auto Power off.
• Polarity Trip Indicater
• Wiring Polarity Indicator
• Measures Voltage & Frequency between Line & Earth before testing.
• Safety: EN 61010 - 1 CATIII 240V.

We are enlisted as famous company engaged in offering a wide range of Fluke 302+ Clamp Meter. These are acknowledged among our clients due to their precise results and advanced finishing. Our all meters are obtained from the licensed vendors of the industry to provide maximum patron satisfaction. Offered meters are highly consistent in nature and can be availed at industry leading prices.

Features:

• 400 A ac current measurement
• Cat IV 300V / CAT III 600V safety rated
• 30 mm jaw size for numerous applications
• Resistance range of 4 k???
• Slim, ergonomic design is easy to carry and simple to use
• Easy to read backlight display

Technical Specifications: