Swastik Enterprises

• Compact ergonomic design
• Easy to carry
• Low maintenance
• High tensile strength
• Voltage, resistance, continuity, capacitance
• Input terminal for ac and dc current measurements to 10 A and current
• Backlit display
• Data hold
• Diode test, plus frequency and duty cycle measurements

• Insulation test voltages 500 V, 1000 V
• Insulation test: 0.1 MΩ to 600 MΩ
• Auto discharge of capacitive voltage
• AC/DC Voltage and milliamps
• Three-year warranty

• Safety first. Connect the insulation tester then keep yourself out of harm's way by monitoring your test measurements remotely.
• Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
• Quickly find problems by saving and comparing measurements over time on a wireless device

• 600 V Cat III safety rating
• 50% bigger display with bright white backlight
• Voltage, resistance, continuity, capacitance
• Input terminal for ac and dc current measurements to 10 A current
• Diode test, data hold

• Basic dc accuracy 0.5%
• CAT III 600 V safety rated
• Diode and continuity test with buzzer
• Small lightweight design for one-handed use
• Rugged, durable design
• Automatic shutdown
• Battery is easy to replace

Environmental Specifications:

• Operating Temperature: 0 °C to +40 °C
• Storage Temperature: -30 °C to +60 °C
• Operating Humidity: Non condensing (<10 °C),<=90% RH (at 10 °C to 30 °C),<=75% RH (at 30 °C to 40 °C)(Without Condensation)
• Operating Humidity, 40 M???: 80% RH 10 °C to 30 °C, 70% RH 30 °C to 40 °C
• Operating Altitude: 2,000 meters
• Storage Altitude: 12,000 meters
• IP Rating: IP 40 per IEC 60529
• Vibration Requirements: MIL-PRF-28800F, Class 2
• Drop Test Requirements: -10°C and 1 meter to surface, per IEC-61010-1, and Fluke SOP 39.1 for portable Hand-held equipment,Shipping container drop per Fluke SOP 39.
• EMI, RFI, EMC Must meet all applicable requirements in IEC/EN 61326-1
• Absorption/Corrosion: Per Fluke SOP 39.1
• Temperature Coefficients: Add 0.1 x specified accuracy for each degree C above 28 °C or below 18 ºC

• Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
• TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
• Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
• Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
• Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
• LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
• Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
• Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
• Measure up to 10 A (20 A for 30 seconds).
• 100 mF capacitance range.